Magic Filament™ PLA SILK Tri-color
Magic Filament

Magic Filament™ PLA SILK Tri-color

769,00 Kč
In stock
TL;DR Three glossy silk colors co-extruded into one filament. Multi-color gradient on every print — without a multi-material printer. The most visual silk in our line.

Probably the best filament on the planet. Three colors woven side-by-side along a single filament strand — your single-extruder printer produces results that look like they came off a Bambu AMS. Magic Filament™ PLA Tri-color Silk is the flagship of our silk family. The most ambitious filament we make.

🎆
Three-color gradient

Cosmic color-shift on every printed surface.

🖨️
No AMS or MMU needed

Flagship multi-color from any single-extruder printer.

🏆
2 signature combos

Curated to deliver maximum color separation.

🇪🇺
Tested in EU

RoHS & REACH certified. Independent lab reports.

RoHS 2011/65/EU REACH compliant 1.75 mm 1 kg spool Tri-color silk Tested in EU

Three colors, one filament, zero compromise

Each 1.75 mm strand is co-extruded from three colored PLA streams, each occupying roughly a third of the cross-section. When you print, all three colors lay down together — but because they sit on different sides of each line, your finished object shifts through three distinct hues as light moves across it. It's the most visually complex filament we make, and the closest you'll get to multi-material printing without owning multi-material hardware.

Why only 2 combinations?

Because most three-color combos look muddy. Three colors compete for attention, and unless the palette is carefully balanced, the result is busy rather than beautiful. We tested dozens of combinations and only two delivered the clean, gradient-shift effect we wanted to put our name on. Buy with confidence: if it's in the lineup, it works.

What's in the pack
  • 1 kg net weight of tri-color silk PLA filament
  • Standard 200 mm spool (fits all common printers)
  • Color combination of your choice (see variants above)
  • Vacuum-sealed with desiccant for moisture protection
  • Recyclable cardboard packaging
Recommended print settings
  • Nozzle temperature: 215–235 °C (slightly higher for max silk gloss)
  • Bed temperature: 50–60 °C
  • Print speed: 40–80 mm/s (slower = sharper color transitions)
  • Cooling fan: 50–80% (lower fan = better silk effect)
  • Retraction: 0.4–0.8 mm (direct drive), 2–4 mm (bowden)
  • Layer height: 0.15–0.2 mm for crisp color definition
  • Drying (if humid): 45 °C for 4 hours

Pro tip: tri-color rewards large, gently curved surfaces — tall vases, lamp shades, helmets, statues. Tiny prints can mix the three colors into a single muddy tone. Print big, print smooth.

Compliance & certifications
  • RoHS Directive 2011/65/EU — confirmed by independent lab report
  • REACH Regulation (EC) 1907/2006 — confirmed by independent lab
  • Not classified as hazardous under EU regulation 1272/2008 (CLP).
  • Distributed by Magic Filament Sp. z o.o., Warsaw, Poland.
  • Declaration of Conformity and Safety Data Sheet available on request — contact@magicfilament.eu.
Tech specs
  • Material: PLA (Polylactic Acid) with silk co-polymer additive, three-color co-extruded
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Spool diameter: 200 mm
  • Melting range: 130–180 °C
  • Recommended nozzle temp: 215–235 °C
  • Auto-ignition temp: >230 °C
  • Density: 1.2–1.3 g/cm³
  • State / odor: Solid / odorless
  • Finish: Glossy silk, three-color gradient shift
For whom
  • Portfolio-piece makers — the filament you use when "good enough" isn't good enough
  • Etsy sellers in the premium tier — products that command €50+ price tags because they look impossible to reproduce
  • Cosplay flagship pieces — convention-grade helmets, weapons, armor with built-in gradient color
  • Special-occasion gift designers — wedding, anniversary, milestone birthday pieces that feel one-of-a-kind
  • Anyone with a single-extruder printer who wants to play in the multi-material league
Kolor Red-Gold-Purple
Free EU shipping over €99 · Ships internationally
SKU: MF001020