Gfit from EDUstick

From $118.13
    Nominały
    $118.13
    $118.13
    Tax included. Shipping calculated at checkout.

    Dispatched within 24 h on business days. Free delivery in Poland from 399 zł, so a mat, a case or a power bank can ride along for less than the courier.

    What you get

    Every EDUstick® set pairs a 3D pen with its external drive unit, configured and ready to use. Accessories ship exactly as described on their own page.

    The gallery shows what arrives. The pen and the drive unit also exist as standalone products, so one damaged element never retires a whole set.

    How to start

    Plug in the USB-C cable, set a temperature for the material, feed in 1.75 mm filament and draw.

    Ten speed levels let a younger hand slow the flow down. Filament joins to filament, so a wobbly line becomes a repair instead of a reason to start over. First models take minutes.

    3D pen specification

    Technology

    FDM / FFF, modular extrusion drive with a mechanical lock, automatic settings per material

    Materials

    PLA, PCL, ABS, TPU, PET-G, with PCL as the low temperature entry for younger children

    Filament

    1.75 mm

    Nozzle

    0.7 mm, ceramic

    Feed speeds

    10 levels

    Working temperature

    50 to 230 °C, in 5 °C steps, stable to within 5 °C

    Parental lock

    limits heating to 90 °C

    Automatic sleep

    after 5 idle minutes

    Safety cut-offs

    temperature sensors, shutdown on overheating, overcurrent and overvoltage protection

    Housing

    non-slip ABS/PC, UL94 HB

    Weight and size

    64.7 g, 160 x 28 x 30 mm

    Drop and pressure

    tested from 1000 mm, over 100 N

    Power

    USB-C, 5 V / 2 A, 10 W

    Controls and display

    display and LED lights, feed, retract, auto-feed, auto-retract, speed and temperature

    Certification and warranty

    EN 71, CE, RoHS, REACH, WEEE, EMC, LVD, 24 months

    Safety and certification

    EDUstick® devices are built on European, certified technology and meet EN 71, CE, RoHS, REACH, WEEE, EMC and LVD requirements.

    The parental lock caps heating at 90 °C. Unlocked, the pen reaches 230 °C, so the adult decides how hot the lesson gets.

    The device sleeps after five idle minutes and the housing temperature stays under control. Tested from a 1000 mm drop and under more than 100 N of pressure. Adult supervision is still recommended.

    Filament and materials

    Every EDUstick® 3D pen takes 1.75 mm filament through a 0.7 mm ceramic nozzle.

    The Magic Filament™ range covers PLA, PCL, ABS, TPU and PET-G. PCL works at the low end of the temperature range, which makes it the entry material for the youngest hands. PLA is the everyday classroom choice.

    See the whole Magic Filament™ range

    Who it is for

    Younger children start in the low temperature PCL mode, where the material stays soft and forgiving.

    Older pupils climb the temperature and speed range and move on to cross-sections, geometric solids and working models.

    Teachers get one device, one routine and one filament standard for the whole group.

    What it builds

    The grip first of all. A 3D pen is held like a pencil, so the hand trains for handwriting while the child thinks it is only drawing.

    Then spatial imagination. Height, depth and balance become something a child has held, not something a textbook claims.

    And the range grows with the child, from flat shapes to cross-sections and working models, on the same device.

    Delivery and payment

    Orders leave us within 24 h on business days. Free delivery in Poland from 399 zł, so one accessory usually costs less than the courier would.

    VAT invoice on request, schools and institutions included. Send your billing details to contact@edustick.eu.

    Warranty and support

    24 months of warranty on every EDUstick® device.

    Write to contact@edustick.eu about a product, an order or a classroom rollout. We reply within 2 business days.

    For schools and institutions

    We issue VAT invoices for schools, nurseries and institutions.

    Equipping a whole class? Send your item list, country and billing details to contact@edustick.eu and we quote per classroom. We reply within 2 business days.

    Devices ship from the European Union and leave us within 24 h on business days.

    EDUstick® already works in over 430 schools in more than 12 countries.
    Gfit from EDUstick

    $118.13

    Add an accessory,
    get free delivery

    Free delivery in Poland starts at 399 zł and the SOLO set sits just under that line. A mat, a case or a power bank crosses it, so the accessory costs less than the courier would.

    All accessories

    Children draw in three dimensions.

    Certified European technology, engineered for daily work with children.

    • Compliant with

      7

      EU standards and directives

    • Dispatch in

      24

      hours on business days

    • Reply within

      2

      business days

    First stroke

    Draw in mid air.
    Keep the shape.

    Gfit from EDUstick belongs to the EDUstick® line: devices, materials and teaching content built to work together. The material sets as it leaves the nozzle, so the result is visible from the first stroke.

    Safe by design.
    Not by warning label.

    A parental lock at 90 °C, automatic sleep after five idle minutes and a controlled housing temperature. Safety sits in the construction of every EDUstick® device, not in the small print.

    Read the FAQ

    Protection

    Three limits that hold.

    90°C

    parental lock threshold

    5 min

    to automatic sleep

    EN 71

    toy safety standard

    Why it works

    Light as a pen. Built like a tool.

    The EDUstick® 3D pen weighs 64.7 g and measures 160 x 28 x 30 mm, so it sits in a child’s hand. It takes over 100 N of pressure, because nobody works gently in a classroom.

    EDUstick® in practice.
    Five details that decide the lesson.

    • 50 to 230°C in 5-degree steps: one device for soft and stubborn materials.

    • Ten feed speeds, so a young hand and a confident hand both stay in control.

    • A 0.7 mm ceramic nozzle holds a steady line from the first minute.

    • One 1.75 mm filament standard across the whole EDUstick® line.

    • USB-C at 5 V / 2 A, 10 W: run it from a laptop or a power bank.

    EDUstick® in numbers.
    Six facts.

    Checkable, not decorative.

    Certified European technology

    Survives a drop of

    1000 mm

    Devices, materials
    and teaching content

    Dispatched from

    the European Union

    VAT invoice
    for schools and institutions

    Warranty

    24 months
    on devices

    Why EDUstick®?
    Six things it builds.

    Not screen time. Skills that stay in the hands.

    • The grip comes first

      A 3D pen is held like a pencil. Fingers learn the right grip while they draw, and the hand builds the small muscles that handwriting needs.

    • It grows with the child

      Flat shapes and a first letter at the start. Later the same pen draws cross-sections, geometric solids and working models. Nothing needs replacing when the child moves on.

    • Space becomes obvious

      Height, depth and balance stop being words in a textbook. A child who has built a cube reads a cube in a drawing, and that is where spatial imagination starts.

    • A mistake is a repair

      Filament joins to filament, so a crooked line gets fixed instead of thrown away. Patience is easier to learn when the material forgives.

    • Focus without a screen

      No app, no slicer, no file to prepare. Hands, material and a plan, for as long as the model takes.

    • Made for a group

      One device, one routine and one 1.75 mm filament standard for the whole class. Parts get divided, agreed and joined.

    How it works

    • Load the filament and set the temperature

    • Follow the model, layer by layer

    • Work safely: lock on, an adult nearby

    • Join the parts and let the model grow

    The thinking stays visible

    The model grows layer by layer, so every decision a child makes is still there to look at. A wrong turn gets cut off and drawn again.

    A lesson without chaos

    One device, one material, one routine. The teacher runs the group instead of running technical support.

    One standard, one budget

    1.75 mm filament across the whole line, so a school orders consumables once and stops matching part numbers.

    Nothing draws without filament.
    Magic Filament™

    One 1.75 mm standard, five materials, colours picked for teaching rather than for the shelf.

    All filaments
    • Magic Filament TPU filament 1.75mm — flexible Shore 95A rubber-like filament for phone cases, gaskets and custom grips — 1kg spool
      Magic Filament

      Magic Filament™ TPU

      $26.99
      $26.99
    • Magic Filament PET-G Matte filament 1.75mm — velvet matte finish in black and white — water resistant, tougher than PLA, no fumes
      Magic Filament

      Magic Filament™ PET-G Matte [High Speed]

      $22.99
      $22.99
    • Magic Filament PET-G High Speed filament 1.75mm — multiple color spools including transparent — water resistant, tougher than PLA
      Magic Filament

      Magic Filament™ PET-G [High Speed]

      $19.99
      $19.99
    • Magic Filament ABS High Speed filament 1.75mm — tough and impact resistant, available in black, white, red, light blue and yellow — 1kg vacuum-sealed spool
      Magic Filament

      Magic Filament™ ABS [High Speed]

      $19.99
      $19.99
    • Magic Filament PLA Marble filament 1.75mm — natural stone effect with organic veining, unique on every print — 1kg vacuum-sealed spool, RoHS & REACH certified
      Magic Filament

      Magic Filament™ PLA Marble

      $28.99
      $28.99
    • Magic Filament PLA Tri-color Silk filament 1.75mm in red-gold-purple — three-color gradient shift on single-extruder printers — 1kg vacuum-sealed spool, RoHS & REACH certified
      Magic Filament

      Magic Filament™ PLA SILK Tri-color

      $29.99
      $29.99
    • Magic Filament PLA Silk Dual filament 1.75mm in blue-green — color-shift spool with product box — dual-color effect on single-extruder printers
      Magic Filament

      Magic Filament™ PLA SILK Dual

      $28.99
      $28.99
    • Magic Filament PET-G Matte filament 1.75mm — velvet matte finish in black and white — water resistant, tougher than PLA, no fumes
      Magic Filament

      Magic Filament™ PLA Matte [High Speed]

      $27.99
      $27.99

    Not sure which set fits?
    Ask before you order.

    Ask a question

    Equipping a school or a nursery? We quote per classroom.