Magic Filament™ PLA Matte [High Speed]
Magic Filament

Magic Filament™ PLA Matte [High Speed]

$27.99
In stock
TL;DR Velvet matte-finish PLA. Hides layer lines, kills glare, looks like resin. 9 colors, 1 kg spool, 1.75 mm. Perfect for miniatures and photo-ready prints.

Probably the best filament on the planet. The soft, powder-coated look that photographs beautifully and hides layer lines. Magic Filament™ PLA Matte turns rough draft prints into portfolio pieces — without sanding, priming, or post-processing.

🌫️
Velvet matte finish

No glare, no shine. Soft, premium look.

🫥
Hides layer lines

Diffuse surface masks 0.2–0.3 mm layers.

🎨
9 designer colors

Curated palette: pastels, earth tones, mutes.

🇪🇺
Tested in EU

RoHS & REACH certified. Independent lab reports.

RoHS 2011/65/EU REACH compliant 1.75 mm 1 kg spool Matte finish Tested in EU

Why matte beats glossy for serious work

Photograph a glossy PLA print and you'll fight reflections all day. Print a miniature on glossy PLA and the layer lines glare back at you under any light. Magic Filament™ PLA Matte solves both — the micro-textured surface diffuses light evenly, killing reflections and visually softening every layer transition. It's the difference between "3D printed" and "professionally finished".

9 colors, designer-curated

Ash Grey, Black, Grey, Kraft, Navy Blue, Olive-Green, Pink, Raspberry, White. We picked these for one reason — they're the colors designers and miniature painters actually reach for. Muted tones that don't compete with detail. Earth tones that look natural. Neutrals that print clean and accept paint without primer.

What's in the pack
  • 1 kg net weight of matte-finish PLA filament
  • Standard 200 mm spool (fits all common printers)
  • Color of your choice (see variants above)
  • Vacuum-sealed with desiccant for moisture protection
  • Recyclable cardboard packaging
Recommended print settings
  • Nozzle temperature: 200–220 °C
  • Bed temperature: 50–60 °C
  • Print speed: 60–200 mm/s (matte forgives faster speeds)
  • Cooling fan: 80–100%
  • Retraction: 0.4–0.8 mm (direct drive), 2–4 mm (bowden)
  • Layer height: 0.2–0.3 mm — matte finish disguises thicker layers
  • Drying (if humid): 45 °C for 4 hours

Pro tip: print bigger layers, save time. Matte hides what gloss would expose.

Compliance & certifications
  • RoHS Directive 2011/65/EU — confirmed by independent lab report
  • REACH Regulation (EC) 1907/2006 — confirmed by independent lab
  • Not classified as hazardous under EU regulation 1272/2008 (CLP).
  • Distributed by Magic Filament Sp. z o.o., Warsaw, Poland.
  • Declaration of Conformity and Safety Data Sheet available on request — contact@magicfilament.eu.
Tech specs
  • Material: PLA (Polylactic Acid) with matte texturing additive
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Spool diameter: 200 mm
  • Melting range: 130–180 °C
  • Recommended nozzle temp: 200–220 °C
  • Auto-ignition temp: >230 °C
  • Density: 1.2–1.3 g/cm³
  • State / odor: Solid / odorless
  • Finish: Velvet matte, non-reflective
For whom
  • Miniature painters — primer-ready surface, hides print artifacts, holds paint beautifully
  • Product photographers — zero glare, perfect for catalog and Instagram shots
  • Designers and architects — concept models that look "presentation-ready" out of the printer
  • Cosplay and prop builders — neutral base for weathering, dry-brushing, painting techniques
  • Anyone tired of layer lines — print faster with thicker layers, the matte surface hides them
Color Black
Free EU shipping over €99 · Ships internationally
SKU: MF001023