Magic Filament™ PET-G Matte [High Speed]
Magic Filament

Magic Filament™ PET-G Matte [High Speed]

€23,99
In stock
TL;DR The bridge between PLA and ABS — tougher than PLA, easier than ABS, water-resistant, no fumes. 12 variants including matte and transparent. 1 kg spool, 1.75 mm.

Probably the best filament on the planet. If PLA is too brittle and ABS is too much hassle, PET-G is your filament. Magic Filament™ PET-G High Speed prints functional parts that survive water, UV, and impact — without enclosures, without fumes, without compromises.

🛡️
Tougher than PLA

Bends before it breaks. Higher impact resistance.

💧
Water & chemical resistant

Outdoor parts, garden tools, light splashes.

😌
Easy to print, no fumes

No enclosure required. Like PLA, but stronger.

🇪🇺
Tested in EU

RoHS & REACH certified. Independent lab reports.

RoHS 2011/65/EU REACH compliant 1.75 mm 1 kg spool Water resistant Tested in EU

Why PET-G is the maker's filament

PLA is great until it cracks. ABS is strong but a hassle — warping, fumes, enclosures. PET-G sits in the middle: noticeably tougher than PLA, prints almost as easily, no enclosure or ventilation drama. It's water-resistant, UV-resistant, chemical-resistant. Real-world parts: phone holders that survive a drop, planters that live outside, brackets for the workshop. PET-G handles all of them.

12 variants — including matte and transparent

Standard finish (9 colors): Avocado, Black, Dark Blue, Grey, Light Blue, Orange, Red, White, Yellow. Vivid, saturated, batch-consistent. Matte finish (2 colors): Matte Black, Matte White — no glare, photo-friendly. Transparent: clear PET-G for LED diffusers, lamp shades, water-clear vases and decorative light fixtures. The transparent variant is what makes PET-G special — you can't print this look in PLA or ABS.

What's in the pack
  • 1 kg net weight of high-speed PET-G filament
  • Standard 200 mm spool (fits all common printers)
  • Color and finish of your choice (see variants above)
  • Vacuum-sealed with desiccant for moisture protection
  • Recyclable cardboard packaging
Recommended print settings
  • Nozzle temperature: 220–245 °C
  • Bed temperature: 70–85 °C
  • Print speed: 50–250 mm/s
  • Cooling fan: 30–60% (less than PLA, more than ABS)
  • Retraction: 1–2 mm (direct drive), 4–6 mm (bowden) — PET-G strings more than PLA
  • Bed adhesion: use thin glue stick layer or PEI sheet — PET-G can stick too well to glass
  • First layer: slow and warm (220 °C, 25 mm/s) for best adhesion
  • Drying (if humid): 65 °C for 4 hours

Pro tip: PET-G's stringing reputation is fixable — raise retraction speed, dry the filament, slow your travel moves. Once dialed in, PET-G prints almost like PLA.

Compliance & certifications
  • RoHS Directive 2011/65/EU — confirmed by independent lab report
  • REACH Regulation (EC) 1907/2006 — confirmed by independent lab
  • Not classified as hazardous under EU regulation 1272/2008 (CLP).
  • No volatile organic compounds (VOCs) emitted during printing at recommended temperatures.
  • Distributed by Magic Filament Sp. z o.o., Warsaw, Poland.
  • Declaration of Conformity and Safety Data Sheet available on request — contact@magicfilament.eu.
Tech specs
  • Material: PET-G (Polyethylene Terephthalate Glycol), high-speed formulation
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Spool diameter: 200 mm
  • Recommended nozzle temp: 220–245 °C
  • Recommended bed temp: 70–85 °C
  • Heat deflection temp: ~70 °C
  • Density: 1.27 g/cm³
  • State / odor: Solid / virtually odorless
  • Water absorption: Low (better than PLA, similar to ABS)
  • Post-processing: Sand, paint, glue (cyanoacrylate works best)
For whom
  • Outdoor part makers — garden tools, planter holders, mailbox parts, anything that lives outside
  • LED and lighting designers — the transparent variant diffuses LEDs beautifully without yellowing over time
  • Workshop and DIY engineers — brackets, jigs, holders that survive shop chemicals and accidental drops
  • Phone accessory makers — stands and cases that flex instead of cracking
  • Hobbyists tired of PLA breaking — same ease of use, real-world durability
  • Anyone without an enclosed printer who still needs functional, durable parts
Kolor Black
Free EU shipping over €99 · Ships internationally
SKU: MF001042