TL;DR
The bridge between PLA and ABS: tougher than PLA, easier than ABS, water-resistant, no fumes. 12 variants including matte and transparent. 1 kg spool, 1.75 mm.
Probably the best filament on the planet. If PLA is too brittle and ABS is too much hassle, PET-G is your filament. Magic Filament™ PET-G Matte prints functional parts that survive water, UV, and impact, without enclosures, without fumes, without compromises.
🛡️
Tougher than PLA
Bends before it breaks. Higher impact resistance.
💧
Water & chemical resistant
Outdoor parts, garden tools, light splashes.
😌
Easy to print, no fumes
No enclosure required. Like PLA, but stronger.
🇪🇺
Tested in EU
RoHS & REACH certified. Independent lab reports.
RoHS 2011/65/EU
REACH compliant
1.75 mm
1 kg spool
Water resistant
Tested in EU
Why PET-G is the maker's filament
PLA is great until it cracks. ABS is strong but a hassle: warping, fumes, enclosures. PET-G sits in the middle: noticeably tougher than PLA, prints almost as easily, no enclosure or ventilation drama. It's water-resistant, UV-resistant, chemical-resistant. Real-world parts: phone holders that survive a drop, planters that live outside, brackets for the workshop. PET-G handles all of them.
12 variants, including matte and transparent
Standard finish (9 colors): Avocado, Black, Dark Blue, Grey, Light Blue, Orange, Red, White, Yellow. Vivid, saturated, batch-consistent. Matte finish (2 colors): Matte Black, Matte White, no glare and photo-friendly. Transparent: clear PET-G for LED diffusers, lamp shades, water-clear vases and decorative light fixtures. The transparent variant is what makes PET-G special: you cannot print this look in PLA or ABS.
Technical data
| Material |
PET-G (Polyethylene Terephthalate Glycol), high-speed formulation |
| Net weight |
1 kg |
| Spool diameter |
200 mm |
| Recommended nozzle temp |
220–245 °C |
| Recommended bed temp |
70–85 °C |
| Heat deflection temp |
~70 °C |
| Density |
1.27 g/cm³ |
| State / odor |
Solid / virtually odorless |
| Water absorption |
Low (better than PLA, similar to ABS) |
| Post-processing |
Sand, paint, glue (cyanoacrylate works best) |
Print settings
| Nozzle temperature |
220–245 °C |
| Bed temperature |
70–85 °C |
| Print speed |
50–250 mm/s |
| Cooling fan |
30–60% (less than PLA, more than ABS) |
| Retraction |
1–2 mm (direct drive), 4–6 mm (bowden), and PET-G strings more than PLA |
| Bed adhesion |
use thin glue stick layer or PEI sheet, because PET-G can stick too well to glass |
| First layer |
slow and warm (220 °C, 25 mm/s) for best adhesion |
| Drying (if humid) |
65 °C for 4 hours |
Pro tip: PET-G's stringing reputation is fixable: raise retraction speed, dry the filament, slow your travel moves. Once dialed in, PET-G prints almost like PLA.
Pack contents
-
1 kg net weight of high-speed PET-G filament
- Standard 200 mm spool (fits all common printers)
- Color and finish of your choice (see variants above)
- Vacuum-sealed with desiccant for moisture protection
- Recyclable cardboard packaging
Who it is for
-
Outdoor part makers: garden tools, planter holders, mailbox parts, anything that lives outside
-
LED and lighting designers: the transparent variant diffuses LEDs beautifully without yellowing over time
-
Workshop and DIY engineers: brackets, jigs, holders that survive shop chemicals and accidental drops
-
Phone accessory makers: stands and cases that flex instead of cracking
-
Hobbyists tired of PLA breaking: same ease of use, real-world durability
-
Anyone without an enclosed printer who still needs functional, durable parts
Load it and print.
Dispatched within 24 h on business days. Free delivery in Poland from 399 zł. VAT invoice on request, schools and institutions included. Not sure which material fits your project? Write to contact@edustick.eu.
