TL;DR
Two glossy silk colors woven into one filament. Color-shift effect on every print, no multi-material printer needed. 4 stunning combos, 1 kg spool, 1.75 mm.
Probably the best filament on the planet. A single filament strand carrying two colors side-by-side, printed normally, but the result shifts hue as light moves across the surface. Magic Filament™ PLA Silk Dual gives you multi-material magic from a regular single-extruder printer.
🌈
Color-shift effect
Two colors shift as light moves. Mesmerizing.
🖨️
No AMS or MMU needed
Multi-color magic on any single-extruder printer.
✨
4 premium combos
Blue-Green, Blue-Yellow, Gold-Copper, Purple-Blue.
🇪🇺
Tested in EU
RoHS & REACH certified. Independent lab reports.
RoHS 2011/65/EU
REACH compliant
1.75 mm
1 kg spool
Dual silk
Tested in EU
How dual-color filament works
Two PLA strands of different colors are co-extruded into a single 1.75 mm filament, with the colors lying side-by-side along the entire length. When you print, both colors lay down together, but because they sit on different sides of each printed line, light reflects differently as you rotate the object. The result: a color-shifting surface that moves, without needing a multi-material printer or any tool change.
4 combinations, picked to pop
Blue-Green: ocean depths, mermaid-scale aesthetic. Blue-Yellow: tropical, electric, high-contrast. Gold-Copper: warm metallic luxury, perfect for jewelry and ornaments. Purple-Blue: cosmic, twilight, mood-piece feel. Every combination is engineered for maximum color separation, so you will see both colors clearly on a finished print, not a muddy mix.
Technical data
| Material |
PLA (Polylactic Acid) with silk co-polymer additive, dual-color co-extruded |
| Net weight |
1 kg |
| Spool diameter |
200 mm |
| Melting range |
130–180 °C |
| Recommended nozzle temp |
215–235 °C |
| Auto-ignition temp |
>230 °C |
| Density |
1.2–1.3 g/cm³ |
| State / odor |
Solid / odorless |
| Finish |
Glossy silk, dual-color shift |
Print settings
| Nozzle temperature |
215–235 °C (slightly higher for max silk gloss) |
| Bed temperature |
50–60 °C |
| Print speed |
40–80 mm/s (slower = better color separation) |
| Cooling fan |
50–80% (lower fan = better silk effect) |
| Retraction |
0.4–0.8 mm (direct drive), 2–4 mm (bowden) |
| Layer height |
0.15–0.2 mm for crisp color definition |
| Drying (if humid) |
45 °C for 4 hours |
Pro tip: vase mode and gentle curves show off the dual color best. Sharp corners and flat tops tend to mix the colors visually, so design with curves.
Pack contents
-
1 kg net weight of dual-color silk PLA filament
- Standard 200 mm spool (fits all common printers)
- Color combination of your choice (see variants above)
- Vacuum-sealed with desiccant for moisture protection
- Recyclable cardboard packaging
Who it is for
-
Printer owners without AMS / MMU: get multi-color results from a single-extruder setup
-
Vase and decor makers: color-shift effect transforms simple curves into statement pieces
-
Cosplay and prop builders: helmets, weapons, armor with built-in color depth
-
Etsy sellers: premium-looking products that don't exist in any local store
-
Gift designers: ornaments, pendants, decorative objects that look impossible to manufacture
Load it and print.
Dispatched within 24 h on business days. Free delivery in Poland from 399 zł. VAT invoice on request, schools and institutions included. Not sure which material fits your project? Write to contact@edustick.eu.
