Magic Filament™ TPU
Magic Filament

Magic Filament™ TPU

£23.99
In stock
TL;DR Flexible filament with rubber-like properties. Shore 95A hardness — bends, stretches, bounces back. Direct-drive printer required. Black, 1 kg spool, 1.75 mm.

Probably the best filament on the planet. The filament that bends instead of breaks. Magic Filament™ TPU opens up an entirely different category of prints — phone cases, gaskets, watch straps, shock absorbers, custom grips. Anywhere you'd otherwise need rubber, silicone, or a flexible plastic moulding.

⚙️
Important — TPU requires a direct-drive extruder

TPU is too flexible to be reliably pushed through a bowden tube. Direct-drive printers only: Bambu A1, Prusa MK3S+/MK4, Voron, Sovol SV07, Creality K1, and others with direct extrusion. Bowden setups will jam or under-extrude.

🤸
Flexible & stretchy

Shore 95A. Bends, stretches, returns to shape.

🛡️
Abrasion resistant

Durable, tear-resistant, long-lasting.

📱
Made for grips & cases

Phone cases, gaskets, custom tool handles.

🇪🇺
Tested in EU

RoHS & REACH certified. Independent lab reports.

RoHS 2011/65/EU REACH compliant 1.75 mm 1 kg spool Shore 95A Direct-drive only

What flexible filament unlocks

Rigid filaments (PLA, PET-G, ABS) build solid shapes. TPU builds things that need to move, flex, grip, or absorb impact. Custom phone cases that fit your phone exactly and survive drops. Gaskets that seal between two surfaces. Watch straps that bend with your wrist. Tool handles with grippy texture. RC tires with traction. Door stoppers that don't damage floors. These are the parts you can't print in PLA — and TPU is the easiest flexible filament to start with.

Shore 95A — the practical middle ground

TPU hardness is measured on the Shore A scale: 70A is gummy bear soft, 100A is hard rubber. Our TPU is 95A — firm but flexible, like a phone case or a stiff shoe sole. It bends and stretches, but holds its shape and doesn't deform under light load. This is the sweet spot for most flexible prints: stiff enough to actually print well, soft enough to flex meaningfully.

What's in the pack
  • 1 kg net weight of TPU filament
  • Standard 200 mm spool (fits all common printers)
  • Color: Black
  • Vacuum-sealed with desiccant for moisture protection
  • Recyclable cardboard packaging
Recommended print settings
  • Extruder type: Direct-drive REQUIRED — bowden setups will fail
  • Nozzle temperature: 220–240 °C
  • Bed temperature: 50–60 °C
  • Print speed: 20–50 mm/s (faster = under-extrusion, gaps)
  • Travel speed: reduce to 150 mm/s max
  • Cooling fan: 30–60%
  • Retraction: minimal — 0.4–0.8 mm, 25 mm/s speed. Too much retraction causes blobs.
  • Acceleration: reduce to 500–1000 mm/s² for cleaner prints
  • Bed adhesion: PEI sheet or glue stick — TPU sticks well to most surfaces
  • Drying (mandatory if humid): 50 °C for 6 hours — TPU absorbs moisture quickly

Pro tip: TPU's #1 enemy is moisture. If your prints feel mushy or bubble, dry the filament. Even fresh from the package, drying for 4 hours improves print quality noticeably.

Compliance & certifications
  • RoHS Directive 2011/65/EU — confirmed by independent lab report
  • REACH Regulation (EC) 1907/2006 — confirmed by independent lab
  • Not classified as hazardous under EU regulation 1272/2008 (CLP).
  • No volatile organic compounds (VOCs) emitted during printing at recommended temperatures.
  • Distributed by Magic Filament Sp. z o.o., Warsaw, Poland.
  • Declaration of Conformity and Safety Data Sheet available on request — contact@magicfilament.eu.
Tech specs
  • Material: TPU (Thermoplastic Polyurethane)
  • Hardness: Shore 95A
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Spool diameter: 200 mm
  • Recommended nozzle temp: 220–240 °C
  • Recommended bed temp: 50–60 °C
  • Print speed range: 20–50 mm/s
  • Tensile strength: ~30 MPa
  • Elongation at break: ~500%
  • Density: 1.21 g/cm³
  • State / odor: Solid / virtually odorless
  • Extruder requirement: Direct-drive only
For whom
  • Phone case designers — bespoke cases that fit one phone exactly and survive drops
  • RC and drone hobbyists — custom tires, bumpers, vibration dampers, landing gear pads
  • Tool makers — ergonomic grips, handle wraps, anti-slip surfaces
  • Watch and accessory designers — straps, bands, flexible jewelry components
  • Cosplay and prop builders — flexible armor joints, costume parts that bend with movement
  • DIY engineers — gaskets, seals, dampers, door stoppers, anything rubber-like
Kolor Black
Free EU shipping over €99 · Ships internationally
SKU: MF001049